IPv6 Routing and 10G Ethernet Switch Solutions for the Next Generation Internet Protocol
PLANET XGS3-24242 Layer 3 Stackable Managed Gigabit Switch supports multi-layer IPv6/IPv4 Gigabit Ethernet Routing, and provides 24 100/1000Mbps SFP slots, 16 shared 10/100/1000Mbps Ethernet ports, 4 extra 1/10G SFP+ uplink slots and 2 20G QSFP+ slots for Hardware stacking to meet the bandwidth requirements and protect network investment for enterprises. The XGS3-24242 is implemented with the following advanced technologies:
■ IPv6/IPv4 Routing and Management
■ 10G Ethernet Switching
■ Single IP Address Management
■ Redundant Power System
■ QSFP+ slots for Hardware Stacking
Positioned as the distribution or aggregation layer switch for large networks, the XGS3-24242 supports IP Stacking technology that helps to manage and configure up to 24 units via one single IP address easily. It is suitable for campus networks, metropolitan IP networks and other large infrastructures as it offers intelligent security features, high performance and flexibility. The XGS3-24242 can also be an excellent choice as a core layer switch for enterprises, data centers or small- and medium-sized networks.
High Reliability Hardware Stacking
Using QSFP+ port to connect several servers and build a virtually logical facility. The XGS3-24242 gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The stack redundancy of the XGS3-24242 ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands
Supporting 10Gb Ethernet
With 10Gbps uplink, the XGS3-24242 can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. Each of the SFP+ slots supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.
The XGS3-24242 boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 208Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
Rich Multi-layer and Multicast Networking Protocols
The XGS3-24242 supports various Layer 2 and management networking protocols to meet the requirements of complex network constructions. It is compatible with 802.1D/w/s, 802.1Q, 802.1p, 802.3ad, 802.3x, GVRP, DHCP, SNTP, etc. The XGS3-24242 also supports IPv6/IPv4 routing protocols including Layer 3 IP static routing, RIPv1/v2, RIPng, OSPFv2/v3, and VRRP protocols.Built in with abundant multicast features, the XGS3-24242 supports rich L2 multicast features such as IGMPv1/v2/v3 and MLDv1/v2 snooping, and L3 multicast protocols -- DVMRP, PIM-DM, PIM-SM and PIM-SSM. Offering the rich application experience, the product supports multicast VLAN registration, multicast receive control and illegal multicast source detect functions. The XGS3-24242 solution performs a cost-effective solution for today with the ability to expand as network demands grow.
Full IPv6 Support
The XGS3-24242 provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR (Weighted Round Robin) and RADIUS authentication. The XGS3-24242 thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.
Excellent and Secure Traffic Control
The XGS3-24242 is loaded with powerful traffic management and WRR features to enhance services offered by telecoms and enterprises. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications.
The ACL policies supported can classify the traffic by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic.
The XGS3-24242 also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. Thus, the XGS3-24242 empowers ISP and enterprises to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission.
Robust Layer 2 Features
The XGS3-24242 can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. It also supports 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. By supporting port aggregation, the XGS3-24242 allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group.
For efficient management, the XGS3-24242 Managed Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the XGS3-24242 offers an easy-to-use, platform-independent management and configuration facility. The XGS3-24242 supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the XGS3-24242 can be accessed via Telnet and the console port. Moreover, the XGS3-24242 offers secure remote management by supporting SSH connection which encrypts the packet content at each session.
Flexibility and Extension Solution
The XGS3-24242 provides 24 100/1000Mbps dual speed SFP Fiber ports and four 1/10Gbps SFP+ Fiber ports. Each of the SFP+ slots supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX. Therefore, the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) or up to 10/20/30/40/50/70/120 km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Intelligent SFP/SFP+ Diagnosis Mechanism
The XGS3-24242 supports SFP/SFP+DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP/SFP+, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
AC and DC Redundant Power to Ensure Continuous Operation
The XGS3-24242 is equipped with one 100~240V AC power supply unit and one empty power supply slot for redundant DC power supply – XGS3-PWR150-48 installation, which supports -40 ~ -60V DC power input. With XGS3-PWR150-48 DC power supply implemented, the XGS3-24242 can be applied as the telecom level device. A redundant power system is also provided to enhance the reliability with either AC or DC power supply unit. The redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity.
Core Routing Switch
With 24 Gigabit ports, 4 SFP+ fiber interfaces and Layer 3 IP/multicast routing capability, the XGS3-24242 provides high-performance solution for telecoms, network service providers and enterprises.
High-density and VRRP Backbone Routing Switch
With the built-in robust IPv4/IPv6 Layer 3 IP and multicast routing protocols, the XGS3-24242 ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 1K routing entries. The high-density routing interfaces provide expandability to meet the growing network’s needs. Moreover, with the hot VLAN feature – Q-in-Q (VLAN stacking) – supported, it allows the service providers to offer certain services such as Internet access on specific VLANs for specific customers and yet still provides other types of services for their other customers on other VLANs.
Data Center Security and QoS Switch
The XGS3-24242 performs 208 Gigabits per second non-blocking switch fabric, so it can easily provide a local, high bandwidth, and Gigabit Ethernet network for the backbone of your department. With the four built-in SFP+ ports, the XGS3-24242 provides the 10G uplink to the backbone network through 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features.
IP Routing Features
Multicast Routing Features
Layer 2 Features
Quality of Service
Redundant Power System
|SFP/Mini-GBIC Slots||24 1000BASE- X SFP interface
Compatible with 100BASE-X SFP transceiver
|Copper Ports||16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports,
shared with Port-1 to Port-16
|SFP+/Mini-GBIC Slots||4 10GBASE-SR/LR SFP+ interface (Port-25 to Port-28)
Compatible with 1000BASE-X SFP transceiver
|QSFP+ Stacking Slots||2 20Gbps Hardware Stacking ports via QSFP+ Interface|
|Switch Processing Scheme||Store-and-Forward|
|Address Table||32K entries|
|Shared Data Buffer||32Mbits|
|Routing Table||IPv4 for 16K
IPv6 for 6K
|Layer 3 Interface||1K|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
PWR1, PWR2, Mode, SYS
|Dimensions (W x D x H)||440 x 350 x 44.5 mm, 1U height|
|Power Requirements||AC: 100 ~ 240VAC, 50/60Hz, auto-sensing
DC: -48V ~ -60V DC (optional)
|Power Consumption||53 watts (max.)|
|IPv4 Layer 3 functions|
|IP Routing Protocol||Static route, RIPv1/v2, OSPFv2, BGPv4
Policy-based routing (PBR)
LPM routing (MD5 authentication)
|Multicast Routing Protocol||IGMP v1/v2/v3, DVMRP, PIM-DM/SM, PIM-SSM|
|Layer 3 Protocol||VRRP v1/v3, ARP, ARP Proxy|
|Routing Interface||Per VLAN|
|IPv6 Layer 3 functions|
|IP Routing Protocol||RIPng, OSPFv3, BGPv4+|
|Multicast Routing Protocol||PIM-SM/DM for IPv6
MLD for IPv6 (v1)
MLD Snooping, 6 to 4 Tunnels
Multicast receive control
Illegal multicast source detect
|Layer 3 Protocol||Configured Tunnels, ISATAP, CIDR|
|Layer 2 Functions|
|Port Configuration||Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Bandwidth control on each port
Port Loopback detect
|VLAN||802.1Q tagged based VLAN, up to 4K VLAN groups
|Spanning Tree Protocol||IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), Spanning Tree by VLAN
|Link Aggregation||Static trunk
IEEE 802.3ad LACP
Supports 128 groups with 8 ports per trunk group
|QoS||Traffic classification based, strict priority, SWRR, WRR, DWRR, SDWRR, WRED
8-level priority for switching
- Port number
- 802.1p priority
- DSCP/TOS field in IP packet
|Multicast||IGMP v1/v2/v3 snooping
IGMP querier mode support
MLD v1/v2, MLD v1/v2 snooping
|Access Control List||Support standard and expanded ACL
IP-based ACL/MAC-based ACL
ACL pool can be used for QoS classification
|Security||Supports MAC+ port binding
IPv4/IPv6 + MAC+ port binding
IPv4/IPv6 + port binding
Supports MAC filter
ARP spoofing prevention
ARP scanning prevention
IP source guard
IPv6 ND snooping
|Authentication||IEEE 802.1x Port-based network access control
AAA Authentication: IPv4/IPv6 over TACACS+/RADIUS
|SNMP MIBs||RFC-1213 MIB-II
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2674 Extended Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
IEEE 802.1X PAE
|System Configuration||Console, Telnet, SSH, Web browser, SSL, SNMPv1, v2c and v3|
|Management||Supports the unit for IPv4/IPv6 HTTP and SSL
Supports the user IP security inspection for IPv4/IPv6 SNMP
Supports MIB and TRAP
Supports IPv4/IPv6 FTP/TFTP
Supports IPv4/IPv6 NTP
Supports RMOM 1, 2, 3, 9 four group
Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
Supports IPv4/IPv6 SSH
The right configuration for users to adopt RADIUS server’s shell management
Supports the function for timing-reset bases needs
Supports CLI, Console (RS232), Telnet
Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3ae 10 Gigabit Ethernet
IEEE 802.3ba 40GBASE-LR4
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)
|Storage||Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)
|2018-10-12||184.108.40.206(R0010.0181)||For hardware version 2.0.
- Fixed sys.log file that could not be cleared correctly.
- Fixed VSF hangup after rebooting active master.
|2016-10-24||220.127.116.11(R0010.0080)||For hardware version 2.0.
Bug Fixed - Fixed CPU that stopped working during operating time.
|2016-09-10||18.104.22.168(R0010.0070)||Initial release for hardware version 2.0.|
|2016-06-23||2.1||Release for hardware version 2.0.|
|2016-08-19||1.0||150-watt AC power supply for XGS3-24042(v2) and XGS3-24242(v2).|
|2016-07-21||2.1||Configuration Guide release for hardware version 2.0.|
|2016-07-12||2.1||Command Guide release for hardware version 2.0.|
|2012-04-30||1.1||Initial Release for Command Guide.|
|2012-04-30||1.1||Initial Release for Configuration Guide.|
|2016-11-03||2.0||Release for hardwarw version 2.0.|
|MFB-Series Transceiver||100BASE-FX SFP Transceiver|
|MGB-Series Transceiver||1000BASE-SX/LX SFP Transceiver|
|XGS3-24042||Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch|
|MTB-Series Module||10GBASE-LR/SR/BX/T Modules|
|CB-DASFP-0.5M / CB-DASFP-2M||10G SFP+ Directly-attached Copper Cable (0.5/2M in length)|
|150-watt 48VDC power supply for XGS3-24042 (v2) and XGS3-24242 (v2) (40V-60V DC)|
|Layer 3 24-Port 100/1000X SFP + 16-Port shared TP + 4-Port 10G SFP+ Stackable Managed Switch|
|40G QSFP+ Direct Attached Copper Cable - 0.5M|
|40G QSFP+ Direct Attached Copper Cable - 2M|