Making Network Connection Easy with 4G LTE Cellular Gateway
PLANET ICG-2420G-LTE is a reliable, secure and high-bandwidth communications industrial-grade cellular gateway for demanding mobile applications, M2M (machine-to-machine) and IoT deployments. It features 4G LTE (Long Term Evolution), four Ethernet ports (3 LAN and 1 WAN), serial ports, DI and DO interfaces and VPN technology bundled in a compact yet rugged aluminum case. It establishes a fast cellular connection between Ethernet and serial port equipped devices.
High-performance 4G LTE
The ICG-2420G-LTE supports LTE 2x1 DL MIMO technology which can reach a download (DL) speed of up to 150Mbps and an upload (UL) speed of 50Mbps. The Cellular Gateway also supports multi-band connectivity including LTE FDD/TDD, WCDMA and GSM for a wide range of applications.
Dual SIM Design
To enhance reliability, the ICG-2420G-LTE is equipped with dual SIM slots that support failover and roaming over to ensure uninterrupted connectivity for mission-critical cellular communications. It provides a more flexible and easier way for users to create an instant network sharing service via 4G LTE whenever in public places like transportation, outdoor event, etc.
The ICG-2420G-LTE is equipped with one convenient feature and that is GPS (Global Positioning System). It is a positioning system based on a network of satellites that continuously transmit necessary data. More signals transmitted from more satellites can triangulate its location on the ground, meaning any location can be easily tracked anytime.
Cost-effective VPN Solution
The ICG-2420G-LTE provides a complete data security and privacy feature for access and exchange of sensitive data. The full VPN capability of the ICG-2420G-LTE including built-in OpenVPN and IPSec VPN functions with DES/3DES/AES encryption and MD5/SHA-1 authentication makes the shared connection more secure and flexible. The IPSec VPN also makes the private tunnel over Internet more secure for enterprises doing business transactions.
Remote Manageable Solution for Ethernet to RS232/RS485 Applications
PLANET ICG-2420G-LTE’s serial RS232/RS485 interface can be converted over the Fast Ethernet networking. It can operate as a virtual server or client where IP-based serial equipment can be managed. The ICG-2420G-LTE helps save the network administrator’s valuable time in detecting and locating network problems, rather than visual inspection of cabling and equipment.
Superior Management Functions
For networking management features, the ICG-2420G-LTE provides such functions as DHCP server, DMZ and Port Forwarding, as well as full secure functions including Network Address Translation (NAT), IP/URL/MAC filtering. The ICG-2420G-LTE has 4G and WAN connection failover characteristics, which can automatically switch over to the redundant, stable WAN connection to keep users always online without missing any fascinating moments.
User-friendly and Secure Management
For efficient management, the ICG-2420G-LTE is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the ICG-2420G-LTE offers an easy-to-use, platform independent management and configuration facility. The ICG-2420G-LTE supports SNMP and it can be managed via any management software based on the standard SNMP v1 or v2 Protocol. Moreover, the ICG-2420G-LTE offers the remotely secure management by supporting SSHv2 and SNMP v3 connection where the packet content can be encrypted at each session.
IPv6/IPv4 Dual Stack Capability
The ICG-2420G-LTE supports both IPv4 and IPv6 Protocols. As more network devices are growing and the needs for larger addressing and higher security become critical, the ICG-2420G-LTE is the best solution for applications of 4G LTE and serial communication to connect with the IPv6 network.
4G LTE Cellular Communication Solution
PLANET ICG-2420G-LTE adopts 4G LTE cellular technology and thus breaks the 100m limitation of RJ45 transmission. Moreover, wherever there is a cell site, the data rate can be transmitted as far as the distance goes. To avoid data loss affected by an unexpected breakdown connection on the part of ISP, the ICG-2420G-LTE has dual SIM card slots, meaning it can support two different ISPs for redundancy.
Industrial Case and Installation
Digital Input and Digital Output (Alarm)
|Copper Ports||3 LAN 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
1 WAN 10/100BASE-TX RJ45 auto-MDI/MDI-X port
|Serial Interface||3 serial interfaces (2 RS232 and 1 RS485)
COM1 (RS232 for management and setup) (115200, N, 8, 1)
COM2 (RS232 TXD/RXD for remote serial device)
COM3 (RS485 D+/D- for remote serial device)
|SIM Interface||2 SIM card slots with mini SIM card tray|
|Cellular Antenna||2 2dBi external antennas with SMA connectors for LTE|
|GPS Antenna||1 28dB gain external antennas with SMA connectors for GPS -2m|
|DI &DO Interfaces||■ 2 Digital Input (DI):
Level 0: 0V~3V (±0.1V)
Level 1: 10V~30V (±0.1V)
■ 1 Digital Output (alarm):
Open collector to 50V DC, 500mA (max.)
|Connector||Removable 3-pin terminal block for power input
Removable 11-pin terminal block for DI/DO and serial interface
|Address Table||1K entries, automatic source address learning and aging|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|Reset Button||< 5 sec: System reboot
> 10 sec: Factory default
|Surge Protection||2KV DC|
|ESD Protection||6KV DC|
|Enclosure||IP40 aluminum case|
|Installation||DIN rail kit|
Ethernet Interfaces (Port1-3 and WAN Port):
LTE SIM and Signal :
SIM1 and SIM2 (Green)
Cellular signal: High and low (Green)
|Dimensions (W x D x H)||60 x 106 x 110 mm|
|Power Requirements – DC||10~32V DC, 1A|
|Power Consumption||7 watts/24 BTU|
|Multi Band Supports|
|EU Model||■ FDD LTE B1/B3/B5/B7/B8/B20 (2100/1800/850/2600/900/800)
■ TDD LTE B38/B40/B41 (2600/2300/2500)
■ WCDMA B1/B5/B8 (2100/850/900)
■ GSM/EDGE B3/B8 (1800/900)
|US Model||■ FDD LTE B2/B4/B12 (1900/AWS1700/700)
■ WCDMA B2/B4/B5 (1900/AWS1700/850)
■ OpenVPN: 10
■ IPSec 12:
Encryption Algorithm: 3DES/AES128/AES196/AES256
Integrity Algorithm: MD5/SHA1/SHA256
|WAN Connection Types||DHCP Client
|Secure Network||IP filter
|Other||Supports demilitarized zone (DMZ)
Supports Modbus TCP (only functions with COM3 RS485)
Supports Port Forwarding
Supports Dynamic DNS and PLANET DDNS
|Basic Management Interfaces||Console; Telnet; Web browser; SNMP v1, v2c, TR069|
|Secure Management Interfaces||SSHv2, SNMPv3|
|SNMP MIBs||RFC 1213 MIB-II
RFC 1643 Ethernet MIB
RFC 2665 Ether-Like MIB
RFC 4293 IP MIB
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control and back pressure
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
|Operating||Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|Storage||Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
1.Password length would become zero sometimes.
2.Polling a GPS and having a GPS signal would not be possible if an SIM card is not inserted.
1.Fixed snmpwalk that was stuck on system Ethernet LAN OID.
2.Fixed unstable 4G/3G LTE connection.
|2018-03-02||1.64||Bugs Fixed - Fixed OpenVPN custom mode w/o username and password not running
Functions Added - Add IMEI in Web UI Identification page
|2017-12-08||1.61||Bug Fixed -
Fixed static route settings that didn't take effect in some situations.
Fixed IPSec connection status that was not stable.
|2017-10-27||1.59||Function Added -
1. Added SMTP function
2. Added Client List function
|Industrial 4G LTE Cellular Gateway with 4-Port 10/100TX (2 SIM Card Slots, 2 RS232, 1 RS485, DI/DO, GPS, -20~70 degrees C, LTE Band B1/B3/B5/B7/B8/B20/B38/B40/B41)|
|Industrial 4G LTE Cellular Gateway with 4-Port 10/100TX (2 SIM Card Slots, 2 RS232, 1 RS485, DI/DO, GPS, -20~70 degrees C, LTE Band B2/B4/B5/B12)|