[ICA-HM125] How can I set factory default ?

Please follow the instruction steps below to reset your camera.

Step 1. Unplug the power jack to turn off the power of ICA-HM125.

Step 2. Insert a pin into the reset hole as circled with red in the below figures. Sense a button and keep it pressed until instructed to release.

Step 3. Plug in the power jack to turn on ICA-HM125, in about 20 seconds the network LED circled in blue will be flashing.

Step 4. Release the button (remove the pin from the reset hole).

Step 5. The ICA-HM125 should now set back to factory default. Have an access to the device by changing to the attempt IP address from the default 192.168.0.20 with login user name admin and no password.




Note :
Do not remove power any time in reset process, the flash memory inside could be damaged.