[IGS-4215 Series] How to Configure ACL on PLANET IGS-4215 Series Switch.

Application: 

Configure the ACL so that the 192.168.10.1 device can only be accessed from the 192.168.10.10 device.

Free data transfer was allowed between 192.168.10.1, 192.168.10.2, 192.168.10.3 and 192.168.10.4.

Access to devices 192.168.10.2, 192.168.10.3 and 192.168.10.4 from device 192.168.10.10 should be denied.

Topology:

ACL Configuration

1. Add an ACL name in an IPv4-Based ACL, such as “test”.

2. Set the ACL Name, Sequence, Action, Source IP address and Destination IP address parameters in the IPv4-based ACE.

3. ACL rules needed in the IPv4-based ACE Table for the application.

4. At last, set the ACL Binding and select the required ports.