[GS-5220, IGS-5225, IGS-6325, IGS-10020 series] How to allow multiple VLANs to pass through the ports of an ERPS ring.

Topology:

The fiber ports are used for ERPS Ring, where VLANs 1 to 3 and 3001 pass through the fiber ports. 

To achieve the goal, please refer to the steps below:

l   Switch 1:

1. Go to the ERPS page and establish the ERPS ring using the Ring Wizard.

2. Click on the “ERPS” and go to the “ERPS ID”.

 3. Go to the VLAN Configuration page. 

4. Click the “Add New Entry” button to add VLANs 2 and 3.

5. Go to the Global VLAN Configuration page using the path: Switching → VLAN Port Configuration.

    Add multiple VLANs to the ports of the ERPS ring (ports 9 and 10).

6. Go to the IP Configuration page using the path: System → IP Configuration.

     Assign the IP addresses to the VLAN 2 and 3 interfaces. 

l   Repeat the steps above on Switches 2 and 3. 

    Thus, VLANs 1-3 and 3001 can pass through the fiber ports.