[GS-4210, IGS-4215, WGS-4215 series] How to configure the IGMP Snooping function.

Please follow the steps to enable IGMP Snooping feature. The example is for IGMP Snooping (v2) within VLAN1. 

1. Enabling the IGMP Snooping.

    Click Switching Ò IGMP Snooping Ò IGMP Setting

2. Configuring the IGMP Snooping Table.

    On the same page, click the “Edit” button shown in the IGMP Snooping Table.

Set the IGMP Snooping Status and Immediate Leave to enable, and click the “Submit” button.

3. Configuring the IGMP Querier Setting.

    Click Switching Ò IGMP Snooping Ò IGMP Querier Setting

    Select VLAN 1, set the Querier State to enable, set the Querier Version to v2, and click the “Apply” button.

4. The IGMP Querier Status is shown below. The Querier IP should be this switch’s VLAN 1 IP.

5. Please save the running-configuration to startup-configuration.

    Click the “Save Configuration” icon to save running-configuration. 

6. Done.