[Password / WGSW-2402] How to deal with forgotten password problem of WGSW-2402?

The default user name is "admin" and password is "123456". The method to slove the forgotten password problem is as following:

1. Download "rswcfg.rom" file from PLANET ftp server by the following link:
ftp://ftp.planet.com.tw/Switch/wgsw-2402/Firmware/

2. User terminal program to connect the console port.

3. Power off and power on (don't use reset) WGSW-2402, then you can see
>>Switch Bootstrap v5.20a (05-08-00)
>>Switch Debug Monitor v5.16d (05-22-00)
>>Booting the Switch... Press ESC to Enter Setup Mode on screenand press ESC, type "upload". and press "Enter".
The switch will show "Start Kermit Upload Now..."

4. User Kermit protocol to send the file to the switch through console cable. For example, In HyperTerminal of Windows, click "Transfer" -> "Send File". Select "Kermit" protocol and the file to send.

5. Reboot, all the configurations are restored to default.