FAQs

Please follow the steps below:

1. Default Gateway and DNS server address should be set up correctly.
   
2. If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server

1. Please fill in ICA-5250V’s IP address in laptop’s browser; install active X (only first-time use) to view ICA-5250V’s video.
   
2. Please install VLC app to your iPhone or Android Phone first. Then fill out rtsp://IP_Address/v1 in VLC app to view the ICA-5250V’s video from iPhone or Android phone.

To recover the default IP address and password, please follow the steps below:

1. Remove the power and Ethernet cable. Press and hold the button as shown in the picture below.
   

2. Power on the camera. Don’t release the button during the system booting.
3. It will take around 30 seconds to boot the camera.
4. Release the button when camera finishes process.
5. Re-login the camera using the default IP (http://192.168.0.20). Username: admin, password: admin

The ICA-5250V(v2) included corridor mode to change video field to vertical. Its sensor is improved to display color video in dark conditions without having to enable IR LED.

You can use the camera utility which is contained on the User’s Manual CD to search the ICA-5250V on your network. If laptop has many different networks (e.g. 192.168.1.x and 192.168.0.x) , this camera utility also can search camera in different networks.

The ICA-5250V supports a maximum of 10 concurrent users.

The ICA-5250V_5550V can send JPEG/AVI files via FTP, email, SAMBA and micro SD card when motion is detected.