Cost-optimized, Multi-mode Ethernet Switch for PoE Networking
To facilitate 32W PoE power network applications with the transmission, PLANET FGSD-1821P is equipped with 16 10/100BASE-TX Fast Ethernet ports, 2 extra Gigabit TP ports and 1 1000BASE-X SFP combo interface ideally suitable for centralized power management. With a total of 185 watts of PoE budget, it features high-performance Gigabit uplink and IEEE 802.3at PoE+ (up to 32W) capabilities.
Two Gigabit Uplink Ports
The FGSD-1821P provides two extra Gigabit TP ports and one 1000BASE-X SFP combo interface that enable the network administrators to increase their network bandwidth to relieve traffic congestion when the two 10/100/1000BASE-T or one 1000BASE-X uplink port are used to connect devices, such as NVR, video streaming server, NAS and more. With the combo design, the administrators can easily connect network devices no matter how large the network expansion is.
Perfect Integrated Solution for PoE IP Surveillance
The FGSD-1821P brings you an ideally secure surveillance system at a lower total cost. The FGSD-1821P provides 16 10/100Mbps 802.3at PoE+ ports able to feed sufficient PoE power to 16 IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with one 16-channel NVR or two 8-channel NVRs, uplinked to backbone switch and the monitoring center. With such a high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites.
Ethernet Data Transmission Distance Extension
The DIP switch provides “Standard”, “VLAN” and “Extend” operation modes.
With this brand-new feature, the FGSD-1821P provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation.
Powered Device Alive Check
The FGSD-1821P adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status.
The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the port is transmitting data. If the port does not transmit data and the duration exceeds a specific time, PoE will automatically power off and then re-power. It also will greatly enhance the network reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden.
Flexible Extension Solution
The two mini-GBIC slots built in the FGSD-1821P are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the FGSD-1821P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The FGSD-1821P provides both 802.3at and 802.3af PoE functions along with 16 10/100BASE-TX ports featuring 30-watt 802.3at or 15.4-watt 802.3af PoE in RJ45 interface, 2 extra Gigabit copper ports and 1 Gigabit SFP uplink interfaces supporting high-speed transmission of surveillance images and videos.
Department / Workgroup PoE Network
Providing 16 PoE in-line power interfaces, the FGSD-1821P can easily build a power that can centrally control IP phone system, IP camera system and wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power-socket limitation, the FGSD-1821P makes the installation of cameras easier and more efficient.
Power over Ethernet
|Fast Ethernet Copper Ports||16 x 10/100BASE-TX RJ45 auto-MDI/MDI-X ports|
|Gigabit Ethernet Copper Ports||2 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
(Port-17 shared with SFP port)
|SFP Ports||1 x 1000BASE-SX/LX/BX SFP interface (shared with Port-17)|
|DIP Switch||Selectable operation mode
|Dimensions (W x D x H)||280 x 180 x 44 mm (1U height)|
|Power Requirements||100~240V AC, 50/60Hz, 5A max.|
|Power Consumption/Dissipation||Max. 207 watts/706 BTU|
|ESD Protection||Contact discharge of ±6KV DC,
Air discharge of ±8KV DC
|Surge Protection||Differential Mode ±4KV, Common Mode ±6KV|
|Installation||Desktop or rack-mount installation|
PoE Max. (Green)
10/100/1000T RJ45 Interfaces
10/100/1000 LNK / ACT (Green)
1000X SFP Interfaces
1000 LNK / ACT (Green)
|MAC Address Table||16K entries|
|Jumbo Frame||16K bytes|
|Flow Control||IEEE 802.3x pause frame for full duplex; back pressure for half duplex|
|Power over Ethernet|
|PoE Standard||IEEE 802.3at Power over Ethernet Plus/PSE|
|PoE Injector Ports||16|
|PoE Power Supply Type||End-span: 1/2 (+), 3/6 (-)|
|PoE Power Output||Per port 55V DC, 600mA. max. 32 watts|
|PoE Power Budget||185 watts|
|Number of PDs, 7 watts||16|
|Number of PDs, 15.4 watts||12|
|Number of PDs, 30 watts||6|
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy-Efficient Ethernet
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5~ 95% (non-condensing)
|Storage||Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|ICA-A4280||H.265 1080p Smart IR Dome IP Camera with Artificial Intelligence|
|ICA-A3280||H.265 1080p Smart IR Bullet IP Camera with Artificial Intelligence|
|ICA-M4580P||H.265 5 Mega-pixel Smart IR Dome IP Camera with Remote Focus and Zoom|
|ICA-4280||H.265 1080p Smart IR Dome IP Camera|
|ICA-3280||H.265 1080p Smart IR Bullet IP Camera|
|WDAP-1750AC||1750Mbps 802.11ac Dual Band Wall Mount Enterprise Wireless Access Point|
|WDAP-8350||600Mbps Dual Band 802.11n Outdoor Wireless CPE (IP66, 802.3at PoE, 4 x N-Type connector)|
|WBS-512AC||5GHz 802.11ac 900Mbps Outdoor Wireless CPE|
|VIP-1120PT||High Definition Color PoE IP Phone|
|VIP-2140PT||High Definition Color PoE IP Phone with Dual Display|
|VTS-700P||7-inch SIP Indoor Touch Screen PoE Video Intercom|
|HDP-1160PT||720p SIP Vandalproof Door Phone with PoE|
|HDP-5240PT||720p SIP Multi-unit Video Door Phone with RFID and PoE|
|HDP-5260PT||720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID and PoE|
|POE-161S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|POE-162S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|IPOE-162S||Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter|
|POE-E202||1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit PoE Extender|
|LRP-101C-KIT||1-Port Long Reach PoE over coax Extender Kit (LRP-101CH + LRP-101CE)|
|LRP-101U-KIT||1-Port Long Reach PoE over UTP Extender Kit (LRP-101UH + LRP-101UE)|
|16-Port 10/100TX 802.3at PoE + 2-Port 10/100/1000T + 1-Port Shared 1000X SFP Desktop Switch|