Meeting All Your Power Needs via IP-based Power Outlets
PLANET IPM-8220 is a 8-port IP Power Management (IPM) device that provides the useful function of managing power for any combination to connect with itself. With the innovative IP-based technology, PLANET has made the traditional power management equipment into true networking devices.
Intelligent Power Management
The IPM-8220 offers 8 power outlets, each of which can be controlled or monitored individually by the console or SNMP manager software or web interfaces, or by setting the button. They allow users to access, configure, and manage many networking devices at the same time from remote locations to save valuable time.
Electric Current Monitored on Display
The aggregate current draw per IPM rack is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Scheduled Power On/Off
The IP-based Switched Power Manager allows you to pre-define a power schedule for IT equipment. It alerts users to an upcoming shutdown, and then waits a predefined amount of time to allow users to finish their work and sign off.
Securing you against the risk of getting the entire circuit cut off, commonly happened with ordinary power distribution units (PDUs), when there is overloaded power, PLANET PDU, with a built-in circuit breaker and reset switch, ensures the stability of power distribution among its equipment. Its 16-amp circuit breaker prevents dangerous circuit overloads that could damage the equipment.
Energy and Cost Saving
You can also check the current energy consumption in your office within the configuration interface of the IPM-8220. It helps you reduce energy consumption, thus saving expenses on utilities.
Remote Management via Network
PLANET Switched IPM consolidates power control, current monitoring, temperature and humidity monitoring with environmental sensor box (ESB), web page management, message, e-mail, and SNMP functions together to enable MIS staff to be informed and thereby to remotely deal with the relevant problems through Internet.
Environmental Sensor Box (ESB)
The IPM-8220 is equipped with a console port for connecting an environmental sensor box (ESB). You may add temperature and humidity sensors to control the power switch by monitoring the environmental changes. When the temperature and humidity reach a high level, you will be notified via SMS and e-mail
|Outlet Power Port||8|
|Inlet Power Port||1|
|Sensor Port||1 x RJ11-type, 6P|
|Com Port||2 x RJ45-type|
|Network Connector||1 x RJ45 port for 10/100BASE-TX|
|Button||1 x Switch button
1 x Set button
1 x Reset button
|LED||1 x Alarm LED
1 x System LED
1 x Reset and warning indicating LED
8 x Outlet status LED
|LCD Panel||Displays total current, max. alarm, voltage and IP|
|Dimensions (W x D x H)||432 x 153 x 44 mm|
|Installation||1U rack-mountable, desktop|
|Breaker||1 x 16A|
|Connection||Inlet Power: 1 x IEC320 C20
Outlet Power: 8 x IEC320 C13
|Maximum Outlet Line Current||10A|
|Management Utility||Web browser, SNMP software, Windows-based utility|
|Security||IP filter/MAC filter/Secure 128-bit SSL encryption|
|Computer Interface||IEEE 802.3 10BASE-T
IEEE 802.3u 10/100BASE-TX
|Regulatory Compliance||CE, FCC|
|Operating Temperature||0 ~ 60 degrees C|
|Operating Humidity||0 ~ 90%|
|Operating Altitude||0-4500 meters|
|IP-based 8-port Switched Power Manager (AC 100-240V, 16A max.)|
|Environmental Sensor Box|