[HDP-1160PT] How to hard reset the HDP-1160PT to factory default values?

To recover the default IP address and password, please follow the following steps.

1. Connect the device and the computer to the same switch, and add an IP address of 192.168.10.2 to the computer.
2. Press “*” and”#” together over 5 seconds when the device is powered on, and then the device will enter post mode.
   
3. Execute prompt command and enter “telnet 192.168.10.1” to connect to the device. Enter “3” to clear the configuration and enter “4” to exit post mode and restart the device.