[WS-1032P] How to configure AP control of WS-1032P

In this example, WDAP-C7210E is used to work with WS-1032P.

Default IP address:

WS-1032Pà192.168.1.100

WDAP-C7210Eà192.168.1.253

1. Add IP Routes setting and press the Apply button to save the setting.

2. Add WDAP-C7210E to AP Management of WS-1032P. 

3. Configure SSID profile contents and then press the Apply button to take effect.

4. Configure Radio profile contents and then press the Apply button to take effect.

5. In the AP Management, press the Clone button first and then press the Save & Apply button.

    At last, press the Save button in the upper right corner of the page to take effect.

6. The system is now processing.

7. Check the result of the WDAP-C7210E.