FAQs

Yes, they can. However, please be noted that the IGS-10080MFT supports DC power from 12V to 48V and supports AC power of 24V only.

The meaning of 3 symbols is shown as below:
: Earth line.
: Null line.
: Live line.

The standard AC power cord, live line is black color, null line is white color and earth line is green color.


Please connect the live line, null line and earth line from AC Power Cord Cable to corresponding location.
Live line: Black color
Null line: White color
Earth line: Green color
Please do not connect the power plug of the power cable to a standard wall
outlet during above installation.

Yes, due to each RJ-45 port of ISW-511 / ISW-621 series support Auto negotiation and it can run at 10/100Mbps half / full-duplex mode, each Fiber port of ISW-511 / ISW-621 series support 100Mbps full-duplex mode.

Regarding this detail descriptions, it is suggested to download the product and read the documentation for more understandings, thank you.

Yes, it does. However, since the MGB-SX and other non wide temperature
SFP module cannot operate under -40 to 75 Degree C. Please pay attention
to this point.

Different operation temperature.
　　ISW-500 / 800: 0 to 60 Degree C
　　ISW-501T / 801T: -40 to 75 Degree C
With T model, it shall runs well in harsh environment.

The IGS-801M Managed Industrial Switch is implemented with "Rest" button. To reset the IP address to the default IP Address "192.168.0.100" or rest the password to default value. Press the hardware reset button at the bottom panel about 10 seconds. After the device is rebooted, you can login the management WEB interface within the same subnet of 192.168.0.xx.