FAQs


Product Category
Keyword
A :

The IGS-801M Managed Industrial Switch is implemented with "Rest" button. To reset the IP address to the default IP Address "192.168.0.100" or rest the password to default value. Press the hardware reset button at the bottom panel about 10 seconds. After the device is rebooted, you can login the management WEB interface within the same subnet of 192.168.0.xx.

A :

Regarding this detail descriptions, it is suggested to download the product and read the documentation for more understandings, thank you.

A :

Yes, due to each RJ-45 port of ISW-511 / ISW-621 series support Auto negotiation and it can run at 10/100Mbps half / full-duplex mode, each Fiber port of ISW-511 / ISW-621 series support 100Mbps full-duplex mode.

A :

Yes, it does, Because they equip the same 15km single-mode fiber optical interface. But, please have noticed that the ISW-511S15 operating temperature is from -10 to 60 Degree C only.

A :

YES, IVC-2004PT, IVC-2002, VC-201A and VC-202A are base on the same ITU-T G.993.2 VDSL2 Profile 17a, they are compatible with each other.

A :

IVC-2004PT only accepts 48V DC for 802.3af PoE operation; please confirm your power source is 48V DC. If your power source is 12V ~ 36V DC, it still can power on the IVC-2004PT yet it can not drive the PoE function due to the IEEE802.3af standard.

A :

Yes, it does. However, since the MGB-SX and other non wide temperature
SFP module cannot operate under -40 to 75 Degree C. Please pay attention
to this point.

Contact Us