Corporate APP
The maximum number of users is limited to 20. However, it also depends on the total bandwidth accessed to this device from clients. Therefore, the actual number of connected clients varies depending on streaming mode, settings of resolution, codec type, frame rate and bandwidth. Obviously, the performance of the each connected client will slow down when many users are logged on.
Maybe too many IP cameras have been installed on the LAN, and then the NAT router is out of resource to support more cameras. You could turn off and on the NAT router to clear the out-of-date information inside the router.
Check the IP address of the ICA-3260 by using the IPWizard II program or by UPnP discovery or set the device to default by the Reset button.
Please follow the steps below:
1) Your connection to the device does not have enough bandwidth to support a higher frame rate for the streamed image size. Try reducing the video streaming size to 160 x 120 or 320 x 240 and disable audio.
2) Audio will consume 32 kbps. Disable audio to improve video. Your Internet connection may not have enough bandwidth to support streaming audio from the device.
To unmount SD card, you’ll have to wait for about two minutes in which time the recording will completely come to a halt.
The maximum number of users is limited to 2. However, it also depends on the total bandwidth accessed to this device from clients. The maximum data throughput of the device is around 20~25Mbps for UDP mode and 10Mbps for HTTP mode. Therefore, the actual number of connected clients is varying by streaming mode, settings of resolution, codec type, frame rate and bandwidth. Obviously, the performance of the each connected client will slow down when many users are logged on.
User name = admin and password = admin. Note that it’s all case sensitive.
