Distance Extension with High Performance and Steady Network Communicating
PLANET IGT-90xT Industrial Managed Gigabit Media Converter series extends communication distance with highly Gigabit performance via fiber optical wire, in which the extension distance could be up to 10km by applying IGT-902TS and IGT-905A (vary on SFP module) or up to 550m with the IGT-902T. The IGT-90xT series is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level Gigabit media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets in sidewalk. Being able to operate under the temperature range from -30 to 75 degrees C, the IGT-90xT series can be placed in almost any difficult environment.
Robust Switch Performance
PLANET IGT-90xT Industrial Managed Media Converter series efficiently converts data between 10/100/1000BASE-T and 1000BASE-SX/LX network, and offers remote management and monitoring capabilities. The IGT-90xT series provides the flexibility with all kinds of 10/100/1000Mbps Ethernet Media on RJ-45 port and performs highly stable Gigabit fiber performance. It also delivers the dynamic status report and real-time alarm messages that helps the network administrator to easily monitor and manage the entire industrial networks.
User-friendly Centralized Web Management Interface
For efficient management, the IGT-90xT Industrial Managed Gigabit Ethernet Media Converter series is equipped with remote Web / SNMP (Simple Network Management Protocol) interface. With the built-in Web-based management interface, the IGT-90xT series acts as an easy-to-use, platform-independent management and configuration facility. It also can be managed via any standard-based management software by supporting standard SNMP. Moreover, the IGT-90xT series can manage the remote client devices by the TS-1000/802.3ah OAM protocol (operations, administration, and maintenance).
Enhanced Management Features
The IGT-90xT series can be programmed for advanced management functions such as IP address configuration, DHCP client function, port configuration, converter configuration, 802.1Q Tag VLAN, Q-in-Q VLAN, QoS, OAM control, Layer 2 protocol filter, broadcast storm control and Ingress/Egress bandwidth control to enhance bandwidth utilization. The enhanced management features offered by the IGT-90xT make it ideally suited for mission-critical and real-time control applications in the Industrial Ethernet networks.
PLANET’s managed industrial Gigabit media converter, IGT-90xT series, offers high reliability and security to make sure the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or the extremely low or high temperatures environments. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems, thus causing incredible financial loss. With the IGT-90xT managed industrial Gigabit media converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation.
Fiber-Optic Networking for ISP, Enterprise, and Home
With high performance of data transmission and easy installation, the IGT-90xT series Industrial Managed Gigabit Ethernet Media Converter can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for small office network environment in the enterprises. The Web Management interface of the IGT-90xT series enables network administrators to easily monitor and setup the converter, the transmission speed and duplex through web browsers.
Layer 2 Features
Quality of Service
|Copper Interface||1 x 10/100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports|
|Optic Interface||IGT-902T: SC
|Optical Mode||IGT-902T: Multi-mode
IGT-902TS: Single mode
IGT-905A: Vary on module
|Optic Wavelength||IGT-902T: 850nm
IGT-905A : Vary on module
IGT-902T: -4 dBm
IGT-902TS: -3 dBm
IGT-902T: -9.5 dBm
IGT-902TS: -9.5 dBm
|Receive Sensitivity||IGT-902T: -13.5 dBm
IGT-902TS: -14.4 dBm
|Maximum Input power||IGT-902T: -18 dBm
IGT-902TS: -20 dBm
10/20Mbps for Half / Full-Duplex
100/200Mbps for Half / Full Duplex
2000Mbps for Full-Duplex
2000Mbps for Full-Duplex
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100BASE-TX: 2-pair UTP Cat. 5, up to 100 m
1000BASE-T: 4-pair STP Cat 5,6 up to 100m
• 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
• 9/125μm single-mode cable, provides long distance for 10/20/40/60/80/120km (very on fiber transceiver or SFP module)
|LED indicator||• Power: P1, P2, Fault
• TP: LNK/ACT, 1000
• Fiber: LNK/ACT
|Power Input||DC 12V to 48V
Redundant power with polarity reverse protection function
|Power Consumption||7.9 Watts/ 27 BTU (maximum)|
|Dimensions (W x D x H)||135 x 85 x 32 mm|
|Installation||DIN rail kit and wall mount ear|
|Management and Layer 2 Features|
|Management Interface||WEB / SNMP v1, v2c|
|Port Configuration||Port disable/enable
Auto negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
|VLAN||IEEE 802.1q Tagged based VLAN , 4K VLAN ID, up to 16 VLAN groups
|QoS||Traffic classification based on :
• 802.1p priority
• IP DSCP field in IP Packet
• IP Address
|Bandwidth Control||Ingress / Egress bandwidth control
• Rate range: 512kbps to 500Mbps
• Broadcast / Multicast / Unknown Unicast packet
|Emissions||FCC Class A, CE Class A|
|Standard||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.3ah OAM
|Stability Testing||IEC60068-2-32(Free fall)
|Temperature||Operating: -30~75 degrees C
Storage: -40~85 degrees C
|Humidity||Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
|2015-04-02||1.0||IGT-902T / IGT-902TS / IGT-905A|
|2013-01-18||1.4b||Release for IGT-905A supports 100Base-FX Fiber Optic Transceiver.
|2012-04-10||1.3b||1.Fix when DHCP enable, the IGT-90x / IGT-90xT can't get any IP address from DHCP Server.
2.Fix when operate VLAN 802.1Q and set the VLAN Tag, after reboot cause can't access into the WEB interface
|2017-05-03||1.1||EC Declaration Release.|
|10/100/1000BASE-T to 100/1000BASE-X Industrial Managed Media Converter (mini-GBIC, SFP)-distance depend on SFP module (-30~75 degrees C)|
|10/100/1000BASE-T to 1000BASE-SX Managed Industrial Gigabit Converter (-30~75 degrees C)|
|10/100/1000BASE -T to 1000BASE -LX Managed Industrial Gigabit Converter (SM) (-30~75 degrees C)|