All-in-One Manageable Dual-band Wi-Fi Solution for Hotel Industry
PLANET WDAP-W750E enables the hospitality industry to build a more high-speed wireless network with 802.1Q VLAN and PLANET AP controller. The WDAP-W750E is an 802.11ac Dual Band In-wall Wireless Access Point that conforms to the standard 86-type electrical junction box and supports IEEE 802.3af/at PoE. It is suitable for in-wall installation enabling to integrate the hotel network with its all-in-one interface. The WDAP-W750E also provides stable 2.4GHz and 5GHz wireless signals simultaneously that make access to internet viable in regard to whatever nature of work you are into.
Concurrent Dual Band and 11AC Wireless Range Extension
The WDAP-W750E conforms to IEEE 802.11a/b/g/n/ac Dual Band standard technology; therefore, it can provide a wireless speed of up to 433+300Mbps. With concurrent dual-band Wi-Fi transmission capability, the WDAP-W750E is more flexible than the traditional repeater that only utilizes single band for range extension in that it can quickly and easily extend high-speed 11ac 5GHz and 11n 2.4GHz wireless networks simultaneously.
Easy Deployment with PLANET AP Controller
To expand the capability of in-wall AP, PLANET WDAP-W750E comes with centralized management, enabling the hospitality industry to deploy multiple APs with a single interface of AP controller and reducing repetitive tasks including AP provisioning, AP status monitoring and AP maintenance. In addition, by connecting with PLANET AP controller, PLANET WDAP-W750E helps hoteliers optimize their wireless network within minutes.
Suitable for Any Room Installation without Spoiling Interior Design
Featuring attractive in-wall design, the WDAP-W750E can be firmly installed into the wall via the standard 86 x 86 mm European outlet box, which makes electrical wiring invisible and convenient for room installation without affecting the original interior design. It is ideal for hotels, residences, hospitals and more to establish any kind of wireless network.
Comprehensive Wireless Operation Modes
The WDAP-W750E supports multiple wireless communication connectivities such as AP, Gateway, Repeater, Super WDS (Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP)), allowing users to comprehensively experience various applications.
Easy to Use ON/OFF and USB Charger
Having a good night sleep is what we need in the hotel. It is easy to turn ON/OFF wireless and LED on the front panel of the WDAP-W750E. When you don’t need to use wireless LAN, just press the button to close the wireless and LED power. To provide better services for travelers, the WDAP-W750E comes with a built-in USB 2.0 charger whose output of 5V DC 0.5A power can charge any USB compliant mobile devices, e.g., cell phones, iPads, and other handheld devices. Thus, the WDAP-W750E brings convenience to pedestrians, travelers and other users without having to worry about forgetting to carry an AC adapter.
Simultaneous Dual Band Wireless Connectivity
Since there are more and more wireless applications and electrical devices using the radio frequency of 2.4GHz, the wireless channel of 2.4GHz has been already too crowded for clients to enjoy the high-speed wireless connection. In order to avoid the wireless interference between each other, PLANET WDAP-W750E provides users with the radio frequency of 5GHz for watching HD videos or playing online games. At the same time, it enables other users to surf the Internet via the original radio frequency of 2.4 GHz.
In-wall Design Ideal for High-density Wireless Network
The WDAP-W750E is specifically designed for hotels, offering guests convenient wireless LAN service. With the standard 86 type electrical outlet box installed and PLANET AP controller supported, you don’t need to spend extra time and cost to deploy the wireless network. Its compact and all-in-one interface adapted to the room can match any decor and makes wiring invisible. The WDAP-W750E brings convenience to system administrators or machine operators as it comes with centralized management characteristic and comprehensive operation modes to fulfill any application at hotels and residences. No expensive instruments or complex back-end subscriber managed systems are required for deployment.
The WDAP-W750E is the characterization of in-wall design, and advanced 2T2R MIMO (2.4G) and 1T1R (5G) technology which reduces the effect of dead spot, so that it can get better coverage of the existing wireless network. Furthermore, the repeater mode supported by the WDAP-W750E helps to minimize the effort of installation and cabling cost.
Standard Compliant Hardware Interface
Secure Network Connection
Multiple Operation Modes and Wireless Features
Easy Deployment and Management
|Interfaces LAN||1 x 10/100BASE-TX RJ45 port
Auto-negotiation and auto MDI/MDI-X
|Interfaces PoE Port||1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel)
*IEEE 802.3af/at PD port
|Interfaces USB Port||USB 2.0, Type A, 5V DC, 0.5A output|
|Antennas Gain||2 x 2dBi antenna|
|Button||Reset button (Press over 15 seconds to reset the device to the factory default)|
|Dimensions (W x D x H)||86 x 35 x 86 mm|
|Weight||106 ± 5g|
|Power Requirements||48V DC IN, 0.5A, IEEE 802.4af/at PoE+|
|Power Consumption||< 5W|
|Wireless Interface Specifications|
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control
|Media Access Control||CSMA/CA|
|Data Modulation||802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM)
802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
802.11b: DSSS (DBPSK / DQPSK / CCK)
|Band Mode||2.4G / 5G concurrent mode|
|Frequency Range||2.4GHz :
FCC: 5.180~5.240GHz, 5.745~5.825GHz
|Operating Channels||FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 (9 channels)
ETSI: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (16 channels)
5GHz channel list will vary in different countries according to their regulations.
|RF Power||< 20dBm (EIRP)|
|Receive Sensitivity (2.4GHz)||802.11b
|Receive Sensitivity (5GHz)||802.11a
Supports IP-MAC binding
|Channel Width||20MHz, 40MHz, 80MHz|
|Encryption Security||64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X|
|Wireless Security||Enable/Disable SSID Broadcast
Wireless – filtering of max. 32 MAC addresses
|Max. SSIDs||4 per radio|
|Max. Clients||64 per radio (50 is suggested, depending on usage)|
|Max. WDS Peers||4|
|Wireless QoS||Supports Wi-Fi Multimedia (WMM)|
|Wireless Advanced||Auto channel selection
5-level transmit power control (100%, 75%, 50%, 25%, 12.5%)
Client limit control, coverage threshold
Wi-Fi channel analysis chart
|Status Monitoring||Device status, wireless client list
PLANET Smart Discovery
DHCP client table
System Log supports remote syslog server
|VLAN||IEEE 802.1Q VLAN (VID: 3~4094)
SSID-to-VLAN mapping to up to 4 SSIDs
|Self-healing||Supports auto reboot settings per day/hour|
|Management||Remote management through PLANET DDNS/ Easy DDNS
Configuration backup and restoration
Supports IGMP Proxy
Supports PPTP/L2TP/IPSec VPN Pass-through
SNMP v1/v2c/v3 support, MIB I/II, Private MIB
|Central Management*||Applicable controllers: WAPC-500, WAPC-1000, Smart AP Control(SAPC),
WS-1232P, WS-2864PVR and UNI-NMS.
*Remarks: The feature will be supported through firmware/system upgrade.
|Environment & Certification|
|Temperature||Operating: -20 ~ 55 degrees C
Storage: -40 ~ 70 degrees C
|Humidity||Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 95% (non-condensing)
|2019-06-03||2.0-Build20190528162942||This firmware is only for the WDAP-W750E. A different firmware cannot be used for a different version. Thus, the WDAP-W750E's firmware only can be used in the corresponding models.|
|2019-06-03||2.0-Build20190528170215||This firmware is only for the WDAP-W750E. A different firmware cannot be used for a different version. Thus, the WDAP-W750E's firmware only can be used in the corresponding models.|
|WNAP-W2200UE||300Mbps 802.11n In-Wall Wireless Access Point w/ USB Charger (EU Type, 802.3af/at)|
|WGR-500-4PV||Industrial Wall-mount Gigabit Router with 4-Port 802.3at PoE+ and LCD Touch Screen|
|WS-1232P||Wireless AP Managed Switch with 8-Port 802.3at PoE + 2-Port 10G SFP+|
|WS-2864PVR||Wireless AP Managed Switch with 24-Port 802.3at PoE + 4-Port 10G SFP+ + LCD Touch Screen and 48VDC Redundant Power|
|750Mbps 802.11ac In-Wall Wireless Access Point with USB Charger (EU Type, 802.3af/at)|